Trailer Genset

 

Trailer Configuration

 Trailer Type

Configuration 

 

Running Speed <80(Km/h)

 

Including taillight, taillight connector, taillight wiring harness and outrigger. 

 

Running Speed<30(Km/h)

 

Including reflector, rubber sealing plug, outrigger, fender, block and fixed bolt.

 

Parking Braking

  • No service braking for below 0.75T, mechanical braking for trailer form 0.75T to 3.5T.
  • No hand brake for below 0.75, ad for above 0.75, hanging and semi-hanging trailers are equipped with parking braking and chock.
  • Braking device must ensure reliable braking from up and down when trailer is on the 26% (15°) slope.
  • Off-road standard trailer has no service braking.

Ground Clearance

  • Regarding intensive trailer, within 1m range between front and bace of axle, ground clearance is larger than 100mm.
  • As for discrete trailer, with respect to over 1m distance between centers of two nearby axles, 33.33mm ground clearance should be increased for each exceeded 1m.

 

 

Tide Easycon

 

 

Options

Easycon 5.0H (Deepsea DSE8610) panel fits for Gen-Gen automatic Synchronising and load sharing.

Easycon 6.0H (Deepsea DSE8620) panel fits for Single Gen - Mains automatic Synchronising.

 

Deepsea DSE7560 Synchronising Controller for Multi gen – Mains Synchronising. This is a separate control unit which enables multiple Easycon 5.0 equipped Gens to be synchronised with the Mains supply.

  (For details specifications of Control Panels,please consult our sale department.)

 

Specifications

- Over Speed pre-alarm & shutdown
- Low Oil Pressure Pre-Alarm & shutdown
- High Water Temp. Pre-alarm & shutdown
- Volts, Current, Frequency, Rpm (Instruments)
- Fuel Sensor as optional
- AMF Module as optional

- Auto Start
- Oil Pressure
- Genset Running Hours
- Battery Voltage and Charging                            

 

TIDE Easycon Control Systems

TIDE Power comprehensive Easycon range control panels are compact, versatile and easy to use.

 

Easycon 2.0L/H (GU601A / Deepsea DSE3110) panel is a key-start auto control panel, it’s a basic control panel fits for  generators up to 100kVA to provide basic operating parameters display and protection.  

Canopy

 
  •  

     

Standard Specifications

- Compact footprint, low profile design. 
- Enclosure, generator set, exhaust system and fuel tank are pre-ssembled, pre-integrated and shipped as one package 
- Body made from steel components treated with polyester powder coating 
- Fire retardant foam insulation 
- Easy access to all service points 
- Exhaust system inside canopy 
- Large doors on each side 
- Control panel viewing window in a access door 
- Emergency stop push button mounted on enclosure exterior 
- Cooling fan and battery charging alternator fully guarded 
- Fuel fill and battery can only be reached via access doors. 
- Lifting points on the base frame 
- Customer options available to meet your applications needs. 

Introduction

Sound–attenuated and Weather-protective Enclosures:  Sound-attenuated and weather protective enclosures for generating sets from Tide Power, meet every sound level requirements and provide optimum protection from inclement weather and are developed and designed by our special acoustic engineers. Our modular designed and sound insulated canopies provide ease of access for servicing and general maintenance and interchangeable components permitting on-site repair. Enclosures are designed to optimize genset cooling performance, providing you with confidence for genset ratings and ambient capability.